Contact us now: Phone: +91 9980456064
img
img
img
img
img

Other Products

24 VDC / 10 Amps SMPS
Features:
Input voltage:230 VAC nominal
Input voltage tolerance:170 to 270 VAC
Output voltage:24 VDC
Line/load regulation: Better than 1 %
Current limit:< 110 %
Dimensions in mms:160 (W) X 150 (D) X 110 (H)
Short circuit Output voltage goes to zero on short circuit & resumes to normalcy on removal of short
Cooling Forced air Cooled


Thyristorised Temperature Controller

Thyristorised Temperature Controller is a system wherein the temperature of an equipment to be heated (e.g. a furnace) is controlled by adjusting the power applied to the heaters in static manner.

Features:
This is a solid state thyristorised temperature controller,hence there are no mechanical problems associated with contactor operated controllers. As a result, there is no sparking,hence no wear & tear & no maintenance is required.This increases the reliability.
A line choke employed at the input limits the inrush current at the instant of thyristor firing.This reduces the stress on the mains supply.This also protects the power device from di/dt failures.
Precise temperature control (typically within 1 %) is possible as the control process is very fast due to solid state control technology.
Fast switching semiconductor fuses are provided in the line top rotect the power devices against overloads & short circuits.
Protection is provided against negative sequence( phase reversal) , phase failure & overtemperature.Under such circumstances,the firing pulses are taken off . The voltage applied to the heaters is brought down to zero & fault indicating lamp on the front panel glows


SERVO/SCVS

We deal in branded UPS, which are offered by world renowned company, Autometer Alliance. Clients can avail from us, UPS equipment and services at most attractive rates and better warranty. These highly efficient UPS systems provide immediate power back up in case of failure in electricity supply. Clients can get these UPS systems at market leading prices.




Thyristorised Battery Charger

We deal in branded UPS, which are offered by world renowned company, Autometer Alliance. Clients can avail from us, UPS equipment and services at most attractive rates and better warranty. These highly efficient UPS systems provide immediate power back up in case of failure in electricity supply. Clients can get these UPS systems at market leading prices.

Features:
Settings for float as well as boost charging.
Auto / Manual boost
Soft start
Input Current limit
Battery Current Limit
Input AC Undervoltage : no tripping , but on sensing undervoltage, rectifier thyristor pulses are blocked. The pulses are released with soft start as soon as input ac voltage regains normalcy & charger voltage gradually builtsup to its set voltage.
DC Overvoltage : Charger trips on sensing output Overvoltage
DC Undervoltage : No tripping, only indication
Input Rectifier Fuse Sensing : Tripping with indication
DC Filter Fuse Sensing : Tripping with indication
Phase Reversal ( only for 3 phase version) :No tripping


SMPS(Battery Charger)

We deal in branded UPS, which are offered by world renowned company, Autometer Alliance. Clients can avail from us, UPS equipment and services at most attractive rates and better warranty. These highly efficient UPS systems provide immediate power back up in case of failure in electricity supply. Clients can get these UPS systems at market leading prices.

Features:
Float / boost Selection
Auto / Manual Selection
Float Mode Indication
Boost Mode Indication
Auto Mode Indication
Manual Mode Indication
Charger On Indication
Charger Fail Indication
Overtemperature Indication with tripping
Output Overvoltage Indication with tripping


STATIC TRANSFER SWITCH

This is a device, which ensures continuity of power supply toyour precious machines and avoids breakdown. This is not an Uninterruptible Power Supply (UPS) System but it aids the user to get continuous power supply by automatically transferring the load to another source in case the priority source fails.

Features:
Transfer of the load takes place through static devices. Hence there is no mechanical movement involved as when you employ contactors for effecting the transfers. This avoids the problems of chattering and sparking. Hence it does not require maintenance & increases reliability.
Fast acting semiconductor fuses are provided in line with each source in order to safeguard the static switch against short circuits and overloads. Normal HRC fuses cannot protect semiconductors, hence fast acting fuses are employed to protect the thyristors.
Transfer of load from one source to another is effected within a period of 15 to 20 milliseconds maximum which doesnot cause any problems like rebooting of computers or tripping of instrumentation load.This has confirmed as these switches have been field tested on actual loads.
The control board has various settings like under voltage, transfer delay time. Two Light Emitting Diodes (LEDs) green & amber to indicate the presence & healthiness of the power supply. Other three red coloured LEDs provide the information about which source is feeding the load.
The static Switch is designed for large input voltage variations of 160VAC to 300VAC. This ensures the smooth functioning of the static switch under worst mains supply conditions.


Light Arresters

When a high voltage (greater than the normal line voltage) exists on the line, the arrester immediately furnishes a path to ground and thus limits and drains off the excess voltage. The arrester must provide this relief and then prevent any further flow of current to ground. The arrester has two functions; it must provide a point in the circuit at which an over-voltage pulse can pass to ground and second, to prevent any follow-up current from flowing to ground.